The construction site should improve the washing facilities for entering and exiting vehicles to ensure that the vehicles are rinsed when they go out. Automatic vehicle flushing devices should be set up at the entrances and exits of the newly started construction site, and a water pool should be set up on the road in the site, equipped with high-pressure flushing water guns. The construction unit shall arrange a special person to be responsible for the washing of incoming and outgoing vehicles and the cleaning of the surrounding roads, ensuring that the outgoing vehicles are washed for no less than 3 minutes, and the wheels and body are not on the road with mud; Responsible for the "three packs in front of the door", regularly clean the mud around the flushing device and the sedimentation tank, and clean the surrounding area of the gate in time to ensure that there are no obvious mud marks or scattered sand and gravel on the road surface of the vehicle exit.
The construction site should improve the washing facilities for entering and exiting vehicles to ensure that the vehicles are rinsed when they go out. Automatic vehicle flushing devices should be set up at the entrances and exits of the newly started construction site, and a water pool should be set up on the road in the site, equipped with high-pressure flushing water guns. The construction unit shall arrange a special person to be responsible for the washing of incoming and outgoing vehicles and the cleaning of the surrounding roads, ensuring that the outgoing vehicles are washed for no less than 3 minutes, and the wheels and body are not on the road with mud; Responsible for the "three packs in front of the door", regularly clean the mud around the flushing device and the sedimentation tank, and clean the surrounding area of the gate in time to ensure that there are no obvious mud marks or scattered sand and gravel on the road surface of the vehicle exit.
Highway construction project wheel washer, the correct operating procedures for wheel washers (car washers, car washing tables):
1 Wheel washer operators must be trained and familiar with the operation process before operation.
2. Before turning on and off the clean turbine, it must be ensured that the sensor and stepper switch are normal and reset. The water level of the pool is within the range that can be washed.
3. The main power circuit breaker is closed, the power indicator is lit, and the cleaning turbine is in standby state.
4. Before the vehicle enters the washing machine, it is necessary to inform the driver about the cleaning procedure, drive the vehicle slowly, and make sure that both the doors and windows are closed and there will be no sudden collision.
5. During the operation of the program, in order to ensure the normal operation of the entire car wash program, please do not turn off the power without authorization.
6. Clean the sludge in the sedimentation tank regularly to prevent it from entering the clean water tank.
7. Check the nozzle and blocked nozzle so that the equipment can be cleaned and maintained correctly and does not affect the cleaning effect.
8. Turn off the power before cleaning and maintenance.
9. In order not to boil the water pump, it is forbidden to wash the car due to lack of water.
10. In the cold winter season, the water pipes must be drained after work to prevent freezing.
For more information about <a href="http://www.hnzega.com/news.html" > wheel washer, pay attention to our Hunan Ruisheng Electromechanical Equipment Co., Ltd., our official website is
www.hnzega.com.
Product.jpg)
