Learn about mobile crushers: suffice it to read this one!

The mobile crushing plant has a short length and can use an independent movable chassis for different crushing equipment, so that the wheelbase is shortened and the turning radius is smaller, so that the machine can drive flexibly in the operating area or on the road.

The mobile station adopts the integrated equipment installation form of feeding, conveying and crushing, which can not only eliminate the complicated operation of component installation, but also reduce the consumption of materials and working hours. The reasonable and compact space layout of the machine does not occupy the site, and also improves the flexibility of the site stationing.

The mobile crushing plant can form a "crushing before screening" or "screening before crushing" process according to customer needs according to different crushing process requirements. And the mobile station can be combined into two or three stages of crushing and screening system according to actual needs. In addition, the equipment can be operated independently, which has a high degree of flexibility in operation and transportation.

Reducing the cost of material transportation is mainly manifested in the mobile crushing plant can process materials on site, and the biggest advantage of this is to greatly reduce the transportation cost of materials.

Easy maintenance, the focus of good after-sales reputation of machinery. The mobile crushing plant has been optimized and enhanced to further accept the advantages of higher strength, better performance and more compact structure.

plant can not only be used independently, but also can provide more flexible machine process configuration according to the different requirements of customers, so as to meet the various requirements of users for mobile crushing and mobile screening of machines, so that the logistics transfer is more direct and effective, and the cost can be maximized.

    maintenance method of mobile crusher

Next, we will talk about the maintenance of mobile crushers, so that your machine can be used for a longer time.

It is necessary to regularly check the wear of the internal components of the machine, such as the wear degree of the center feeding pipe, cone cap, impeller upper and lower runner liners, circumferential protective plates, and jaw plates, and the wear should be repaired or replaced in time if the wear is more serious, and the weight, model and size of the replacement parts must be replaced according to the original component parameters.

Always pay attention to and timely do a good job of lubrication of the friction surface, and the grease used should be determined according to the location of use and temperature conditions, generally using calcium-based, sodium-based and calcium-based grease; When adding grease, the raceway of the roller bearing should be cleaned with clean gasoline or kerosene, and then added, the grease added to the housing should be about 50% of its space volume, and replaced every 3~6 months, which not only ensures the normal operation of the machine but also prolongs the service life.

no ash leakage, and pay more attention to dust and other debris must not enter the lubrication system and lubrication parts, because these debris will not only damage the lubricating oil film, but also make the equipment lose lubrication and increase wear, shorten the service life of the equipment; In particular, pay attention to the regular cleaning of the bearing, the crusher after 2000 hours, open the spindle assembly to clean the bearing, generally work 7200 hours to replace the new bearing.

1. It is widely used in mines, coal mines, garbage and construction waste recycling, earthworks, urban infrastructure, roads or construction sites and other site operations.

2. Treat topsoil and other materials; separation of viscous coagulation aggregates; construction and blasting industry; sieving after crushing; Quarrying industry.

3. Artificial sand making of river pebbles, mountain stones (limestone, granite, basalt, diabase, andesite, etc.), ore tailings, and stone chips.

according to the requirements, and small and medium-sized equipment is mainly lubricated regularly with grease and lubricating oil. In large equipment, if cone and large jaw crushers are used, there is generally a forced lubrication system. At this time, you should always pay attention to observe oil temperature, oil pressure, flow rate and other parameters. Fasten fasteners that appear loose.

we should always pay attention to the noise and vibration of the equipment, and when excessive noise or vibration occurs, it should be stopped and checked quickly. After troubleshooting, a no-load reboot should occur in the boot order.

equipment, it is also necessary to pay attention to the quality and yield of the product, and when the quality and yield are not normal, there may be failures such as the blockage of the crusher and screening machine or the damage of the screen surface.

In order to maintain good performance of the equipment, in addition to normal maintenance, the equipment should be repaired as planned.

The maintenance plan of the mobile crushing and screening equipment is proposed according to the inspection requirements of each part of the machinery used. Due to the different maintenance plans of each machine, some machinery can be replaced for maintenance when conditions permit. This reduces downtime and increases equipment availability.