Grinding knives does not harm the woodcutter. The inspection and preparation work before starting the diesel engine driven screw machine can timely detect potential faults in the machine equipment, avoid serious faults, and reduce the failure rate. Below are tips on the items that need to be inspected before starting the diesel driven screw machine:



The screw machine needs to be placed in a flat and windward position, especially in mining areas or construction sites. The screw machine should be placed in a place with less dust as much as possible, and the tires must be fixed to prevent movement< Br/>


Check if the screw oil, diesel engine oil, and antifreeze are sufficient, and if there is any discoloration or deterioration; Whether the air filter element and pipeline are damaged or leaking; Whether the screws of key parts are tightened< Br/>


During use, regularly check the running time of the equipment. If the maintenance time is reached, it should be maintained in a timely manner. The method of checking the running time is to power on, press the modify timing button, and display the number H-XX XXXX; the number displayed after X is the running time.



Check if there is water in the oil and gas tank, especially in areas with high air humidity, and check daily. The method of draining water is to slightly open the oil drain valve under the oil and gas tank, and if the liquid flowing out is relatively lubricating with your hand, you can immediately close the valve. It should be noted that the machine head must be left to stand for at least 6-8 hours before draining, otherwise the discharged liquid will be an oil-water mixture.

If the new machine or screw machine has not been used for a long time, it is necessary to add more than 2L of screw oil to the head of the screw machine before starting it to prevent damage caused by oil shortage. Remove the air intake valve on the intake valve, open the intake valve, and add Zhigao special screw oil< Br/>


The maintenance intervals vary depending on the usage environment, with heavy dust and high air humidity. The maintenance intervals should be shortened accordingly:



1、 The main items of first maintenance and routine maintenance include replacing the oil filter and screw oil< Br/>


2、 The main maintenance items include replacing the oil filter, screw oil, oil separation core, etc< Br/>


3、 The air filter element is a mandatory inspection item for each shift, and it is cleaned with low-pressure air from the inside out. If any damage is found, it should be replaced promptly< Br/>


4、 Different brands, viscosities, and types of screw oils cannot be mixed< Br/>


For more information on Zhigao screw air compressors, follow us at Hunan Ruisheng Electromechanical Equipment Co., Ltd< Br/>


Related information:



What are the steps for installing the down-hole drilling truck unit



Integrated drilling rig: ZGYX-460 Integrated drilling rig explanation



Fog cannon manufacturers seize market hotspots