You are here： Home >> News >> Company News >> View Details

Company News

Common faults and treatment methods of wheel washers

From： Hunan ZEGA Date：2019-07-23 17:04:22 Hits：629 Belong to：Company News

　　Common faults and solutions of fault handling methods, construction site wheel gaskets: engineering vehicle wheel washers are used in construction sites for a long time, inevitably encounter a variety of shortcomings, if you can solve some simple problems, if it is more complex shortcomings, it needs professionals to solve.

　　Construction site locomotive gasket troubleshooting method

　　1. The main reasons for the parking failure of the rotary gear at the end of the wheel washer pipeline > automobile , are nozzle blockage, nozzle deflection angle is too large or too small, and the rotating gear is damaged. Solutions include cleaning nozzles, adjusting the deflection angle to normal values, and replacing damaged rotary gears.

　　2. When the water pressure of the high-pressure main engine of the construction vehicle wheel washer is too low, it may be that the pressure of the regulator is too low to adjust the normal value of the pressure, and the belt slippage is easy to produce the water pressure is too low, so adjusting the belt tension will not produce sliding when in use; Leaking pipes and damaged valves can also cause water pressure to be too low. The cause of the failure, the pipeline leakage only needs to be checked and tightened, the valve damage needs to be repaired, and the unrepairable needs to be replaced. wheel washer

　　3. In addition to the low water pressure failure, the abnormal noise of the pump will also occur in the high-pressure host. Abnormal noise from the pump can suck in air. At this time, the water level of the tank should be checked. If the water level is not too low, or the inlet filter is blocked, the filter element should be cleaned.

　　When starting the wheel washer at the construction site, first check whether the water level of the reservoir under the car washing machine is deep enough to meet the water level requirements. If the water level is low, some water should be added accordingly. If the car wash sprinkler at the construction site does not sprinkle smoothly when washing, it is caused by the blockage of the car wash machine sprinkler. The reason may be that the water in the pool is dirty, so the nozzle will be blocked, so it should be cleaned in time. Before use, it is also necessary to check whether the car wash machine accessories at the construction site are loose, because during use, the accessories are often loose. Therefore, it is necessary to check these accessories regularly and tighten them in time if they are loose.

　　Engineering wheel washer use pay attention to three points

　　1. Professional nursing staff should be equipped with special personnel to supervise and maintain the engineering car washing machine, although it is automated enough.

　　2. Pay attention to circuit safety when using< br/>
　　Before the engineering car washing machine works, it should carefully check whether its line is safe to avoid casualties and machine damage caused by the line. In addition, after cleaning, the circuit should be inspected to ensure safety.

　　3. Choose the appropriate working temperature

　　Before carrying out on-site car wash work, we should have a specific understanding of water temperature and weather conditions. In the cold winter, the water in the reservoir is easy to freeze, so the water from the reservoir should be released after cleaning every day to avoid the time delay caused by freezing the next day. In the absence of a time limit, we can also choose to wash at a higher temperature. It can be adapted to different sites, easy to handle, and can be recycled and reused. At present, with the development of science and technology and the simplification of the operation mode of engineering car washing machines, engineering car washing machines have been widely used by users. Are there also many cheap and quality engineering car washing machines on the market now? Provide users with choices, but when choosing, users should choose according to their actual needs, which is conducive to saving resources and reducing costs.

　　Fourth, pay attention to the place of use

　　As a kind of automatic car washing equipment, high-stability engineering car washing machine does not require manual operation when working. The cleaning time is short, but the cleaning is clean, which is easy to transport and install. It has become a standard in the automotive industry. Even many gas stations have purchased fully automatic car washes to attract returning customers.

　　But one thing to keep in mind is that there must be no fire and flammable explosives around when in use. Fully automatic wheel washing machine is a kind of mechanized equipment, which is mainly used for automatic cleaning of the transportation of engineering vehicles to solve the problem of road pollution of vehicles at urban construction sites. It is suitable for construction sites, garbage disposal sites, quarries, cargo transfer yards and other places that may pollute the road, and prevent dust pollution caused by vehicle spraying and dripping.

　　

Previous：Hunan automatic fog cannon machine information

Next：How to operate the engineering wheel washer