You are here： Home >> News >> Company News >> View Details

Company News

The air compressor maintains 3 dry goods well

From： Hunan ZEGA Date：2019-01-03 14:57:29 Hits：606 Belong to：Company News

Many air compressor manufacturers think that after the air compressor is purchased, it only needs to be used, and then the after-sales personnel can be replaced and maintained regularly. In fact, this is a big misunderstanding, the replacement of consumables of the air compressor and the maintenance and repair of after-sales personnel are only one of the links. Let's share a little dry goods for you: how to maintain the air compressor for a longer and stable operation.

　　1. Daily maintenance:

　　The maintenance of the air compressor is a daily work, generally carried out before, after and during the shift, in order to ensure the normal operation of the equipment and the civilized and clean work site.

　　1. Every day or shift should be refueled to each refueling point of the compressor, there are special requirements, such as the lubrication of motor bearings, refueling according to the instructions, in short, all moving friction parts, including accessories, should be refueled regularly.

　　2. Use the machine according to the operating procedures, check and investigate frequently, deal with faults in time and keep a diary.

　　3. When working, keep the machine and the ground clean, and wipe the equipment clean before handing over.

　　4. When the temperature of the room is lower than 5~C in winter, the cooling water in the cavity should be discharged after parking.
Chigo screw air compressor

Second, after-sales maintenance:

　　Every once in a while, the after-sales personnel of the air compressor will carry out an overhaul of the air compressor, replace some filter materials with a short time period of the air compressor, and repair and maintain the air compressor.

　　1. Clean the air valve, remove carbon deposits in the valve seat and valve cover, clean the lubricating oil filter and filter screen, and do an inspection of the moving structure.

　　2. Clean the filter. Where there is a lot of dust, the filter should be cleaned to reduce cylinder wear.

　　3. Filter the air compressor oil every 2000h to remove metal chips and dust impurities. If the oil is not clean, the oil should be changed and a comprehensive check of the gap of the entire machine should be carried out.

　　Third, long-term idle maintenance:

　　Most factories will be equipped with some spare air compressors, which will not be used for a long time (generally to be sealed), but idle for too long will still make the function of the air compressor decline or even difficult to use, when the air compressor is idle more must be maintained on the air compressor.

　　1. Before the unit is sealed, the specified amount of grease paste should be filled as required, and if the inactivity period exceeds 6 months, the grease paste should be re-injected, and the grease paste must be re-added before driving.

　　2. Before the unit is put into operation again, the grease of the oil seal is removed, washed with kerosene or gasoline, and then new oil is added.

　　As the core machinery produced by the factory, the air compressor is a task that cannot be ignored to prevent and maintain the problems caused by the air compressor in advance.

Previous：What are the common faults and solutions of inverter air compressors?

Next：What are the advantages of frequency conversion air compressors